1：运行下载的文件夹里面的OllyICE
Download folder to run inside the

2:菜单：文件—打开，选择倚天2U正版文件里的deepsky文件后打开后出现如下对话框，
选择：否
Menu: File - Open, select 2U Yitian deepsky genuine document after document to open the following dialog box,
Choice: whether




3:程序停止在如下界面。
Interface in the following procedures to stop


















4:这是你按住SHIFT键再按F9,直到能看到下图黄色标记处的东东，点一下就看到绿色标记的对话框出来了，这时你可以点:确定
This is you hold down the SHIFT key and then F9, until the next map to see a yellow marker of the Eastern Department, click on the green marker to see out of the dialog box, you can point at this time: to determine

5:跳出这个对话框，表示这个是正版的软件要授权文件，但现有的文件与你的电脑不匹配，不用管他，不要点：确定
Jump out of the dialog box that this is licensed software to authorize the document, but the existing document with your computer does not match, do not control him, not to point: to determine






点下图工具栏上的那个M，就会出来如下画面，然后选择下图标记的那行点右KEY,选择在CPU数据中查看，
Point under the map on the toolbar that M, the following screen will come out, and then select the next map points marking the line right KEY, select the data in the CPU view




就回到了主窗口，在下图大黄色区点右KEY,查找二进制字串
Back to the main window on the next map area at the right big yellow KEY, find the binary string


出来如下对话框后输入：00 01 00 01 02 02 00 02
After the input from the following dialog box







回到如下界面，左下红色标记上点右KEY,硬件写入断点
Back to the following interface, a red tag on the lower left point of the right KEY, hardware write breakpoint

下好断点后可以看看是由正确的，Under after a good look at the breakpoint is correct
点菜单：调试----硬件断点，如果正确的话就应该是如下图
Point Menu: ---- hardware debug breakpoint, if correct, should be the following graph


再点击菜单：调试---重新开始，出来的对话框如果和前面的一样就按前面的教程操作，然后会停止下来，
再点菜单：调试---硬件断点，如上图会出来，点跟随，确认后就到了下面的图，这时就按SHIFT+F9,同时注意下图的变化，看到是：00 01 00 0 1 02 02 00 02时就停下来
慢点按，看到程序没有动了，再按一下
Then click the Menu: --- to start debugging, the dialog box out front if you like the tutorial on the operation by the front, and then stop down
Menu again: --- hardware breakpoint debugging, will be out in the above chart, point to follow, after confirmation by the following chart, this time on the press SHIFT + F9, while paying attention to the changes under the plan to see is: 00 01 00 0 1 02 02 00 02 when stopped
Slowly by, see the process does not move, and then click





如下图的标志数据出来后就不要按了，把这几个选中，右KEY,
As illustrated by the data after a sign of not pressed a button, put a few selected, right-KEY
















如下图，二进制—用00填充
The following diagram, binary - filled with 00






改好后就如下图
再点菜单：调试---硬件断点，出来的对话框，后按删除，确定，，
再按SHIFT+F9
Improved after the following plan
Menu again: --- hardware breakpoint debugging, the dialog box out, and then click Delete to determine,
And then SHIFT + F9










出来如下图后就可以关掉全部的程序了，到这破解就完成了，关掉破解程序，再运行棋软看看是否可以了，呵呵，
By the following graph can be switched off after all the procedures, and that this break is complete, turn off the crackers, and then run the game see if it can be a soft, huh, huh


đây là hướng dẫn crack của bọn TQ, mình dùng google dịch ra tiếng anh và làm theo, hình ảnh các bạn có thể lấy từ file gốc đã được Long Nữ upload.

Chúc các bạn thành công